La Cornue Oven
Error Codes

E0 Control Board Init Error High The oven shows no signs of life or immediately displays E0 when power is applied. View -> E0 Control Board Init Error High No display, no response to controls — the oven appears to have no power. View -> E1 Board Self-Test Failure High The oven abruptly stops heating and all functions cease during a cooking cycle. View -> E1 Heating Element Fault Medium The vault cavity takes much longer to reach set temperature or has noticeable hot and cold spots. View -> E3 Conv Element Open Circuit Medium Food remains undercooked or cooks much slower than expected in convection mode. View -> E4 Ventilation System Fault Medium Food comes out steamed rather than roasted, and visible condensation forms inside the cavity. View -> E5 Cooling Fan Failure Medium The top, sides, or back of the oven feel much hotter than usual during operation. View -> E6 Moisture Sensor Failure Low Food is sometimes over-dried or under-dried, with unpredictable moisture in the finished product. View -> F1 Oven Temp Sensor Open Medium The oven cavity stays cold after selecting a temperature and starting a cycle, even after 10 or more minutes. View -> F1 Temp Sensor Open Circuit Medium The vault oven cavity remains cold after starting a cooking cycle. View -> F2 Oven Temp Sensor Short Medium The oven begins preheating but shuts down within seconds, displaying the F2 code. View -> F2 Temp Sensor Short Circuit Medium The vault oven begins heating but shuts down within seconds of starting. View -> F3 Oven Overtemperature High The outside surfaces of the oven, handles, and surrounding cabinetry feel unusually hot to touch. View -> F3 Overtemperature Condition High The heavy cast-iron exterior and surrounding surfaces are significantly hotter than normal. View -> F4 Conv Fan Motor Failure Medium Food cooks unevenly in convection mode because the fan is not circulating hot air inside the cavity. View -> F5 Control Board Comm Error High Buttons and knobs produce no response from the oven, which appears dead. View -> F5 Control Board Comm Error High All buttons, knobs, and settings produce no response from the vault oven. View -> F7 Door Lock Failure Medium The oven door is either stuck in the locked position or refuses to lock for self-clean. View -> F8 Steam Generator Fault Medium The vault oven produces no visible steam when steam cooking mode is selected. View -> F9 Door Latch Switch Fault Low The self-clean function will not initiate because the door switch cannot confirm closure. View ->